Instructions for Attaching E-Z Stitch No Basting System to Fabric

Step 1
Cut fabric 1” longer than your project calls for (the two ends of fabric that will be attached to scroll rods) to allow the tape to be cut off when project is completed. Cut tape to width of fabric. Mark center of project.

Step 2
Peel back 1-1/2” of the release liner (be careful not to touch the adhesive) and apply to one end of the fabric (see diagram A). Peel off the release liner as you work across and press down on the tape to adhere to the fabric.

Diagram A

Step 3
Repeat step 2 on the other end of the fabric.

Step 4
Attach fabric parallel to scroll rods so that fabric will roll straight when rolling fabric around scroll rod (see diagram B).

When you want to take the fabric off the scroll rod, lift fabric straight up and peel off.

Diagram B

Congratulations, now you are ready to assemble the Individual Frame.

Click Here to view Scroll Frame Assembly Instructions.

Click Here to view our selection of Individual Frames with No Basting System pre-attached.
Click Here to view our selection of Scroll Rods with No Basting System pre-attached.

Click Here to order No Baste System for Fabric
Click Here to order No Baste System for Scroll Rods